The smaller double telescope crane has a lifting moment of 4.2mt or 5,2mt and a reach of 7.5m or 8,2m. It's slimline and lightweiht construction means it has a very high lifting force. Like every STEPA crane, it is fitted with the EPSLINK link and a 4.5t rotator.
Specifications
- Fitted with double slewing system
- New mounted knuckle boom
- Patented EPSLINK
- 4.5t rotator
- Large slewing torque of 13kNm or 16kNm
- S700 fine grain steel rolled by VOEST
- Low tare weight, high lifting capacity
- Quality and expertise from Austria
- Cathodic dip-painting & powder coating
- Safety equipment (emergency stop, etc.)
The forestry crane with an 8.5m reach is available in two lifting classes of 5.2 & 6.2 mt lifting moment. Due to its large telescope range, the crane still has a short parking length despite its large total reach. The knee lever between the lifting boom and the knuckle boom ensures a constant speed over the entire movement range.
Specifications
- large reach with short parking length
- protected boom system up to grapple end
- large slewing torque of 16kNm
- patented EPSLINK
- 4.5t rotator
- quality and expertise from Austria
- S700 fine grain steel rolled by VOEST
- cathodic dip-painting & powder coating
- safety equipment (emergency stop, etc.)
Technical information
-
lifting capacity FL 85 -
hook clearance FL 85
STEPA’s top-of-the-line models has a 9m or 10m reach and a lifting moment of 7mto or 8mt. This means that even the heaviest timber can be loaded.
Specifications
- Protected boom system up to grapple end
- Large slewing torque of 18kNm or 20kNm
- Patented EPSLINK
- 4.5t rotator
- Quality and expertise from Austria
- S700 fine grain steel rolled by VOEST
- Cathodic dip-painting & powder coating
- Safety equipment (emergency stop, etc.)/li>