The STEPA forestry trailers are some of the strongest and yet also some of the lightest on the market. The nex HEXAGONAL baseframework has a higher torsion-restistant. The continuous shaft, a very strong new front grille, the patented articulated drawbar and high-quality brake system by renowned manufacturers make the STEPA forestry trailer the top product on the timber trailer market.
Forestry
Forestry trailers / timber trailers
Payload
5,650 - 13,250kg
Load volume
2,0-3,0m²
-
B-9 tonne forestry trailers
Specifications
- Cost-effective solution
- Jack
- Protected flap-down stabiliser
- Robust HEXAGOAL frame
- Continuous bogie
- Low tare weight for small tractors
- Extremely strong front grille
- Primed with E-coat and powder-coated
- Articulated drawbar with pivoting range of +/- 40°
Technical information
-
C-10-tonne forestry trailer
The first FHL forestry trailer with a permissible gross laden weight of 10 tonnes has all the benefits of the larger models. In addition to other combination options, this forestry trailer comes equipped with the patented STEPA articulated drawbar and LED rear lights as standard. It is also available with extendible frames for longer timber and internal posts for bush and metre sitters.
Specifications
- Patented articulated drawbar
- Protected flap-down stabiliser
- LED rear lights
- Continuous bogie
- Jack
- With hydraulic or compressed-air brake system
- Primed with E-coat and then powder-coated
- Articulated drawbar with pivoting range of +/- 40°
Technical information
-
C-12-tonne forestry trailer
The 12-tonne forestry trailer stands out with its high payload. It weighs less than 2000kg thanks to the improved material quality of the STEPA trailer. This is achieved while retaining large, solid tube sizes, the tried-and-tested frame, strengthened front grille, drawbar, extendible frame and robust continuous shaft.
Specifications
- Patented articulated drawbar
- Protected flap-down stabiliser
- LED rear lights
- Continuous bogie
- Jack
- With hydraulic or compressed-air brake system
- Primed with E-coat and then powder-coated
- Drawbar with pivoting range of +/- 40°
Technical information
Patented articulated drawbar
The patented STEPA articulated drawbar prevents unwanted damage occurring to the drive shaft and pump. The drawbar’s hoses and cable, as well as the lights, are also protected within the drawbar itself.
Strengthened front grille
Since January 2016, STEPA has made the front grille up to 100% stronger. As such, STEPA’s front grille is one of the strongest on the entire forestry trailer market.
Cathodic dip-painting & powder coating
All main components in STEPA forestry cranes & forestry trailers are cathodic dip-painted and powder coated. This high-quality type of paintwork guarantees that STEPA products will still look good after years of use and helps keep the resale value high.
LED rear lights
Since January 2013, Stepa has installed FHL forestry trailers with LED rear lights as standard. This means you no longer have to deal with defective bulbs and can benefit from the longer life of LED lights.
Robust flap-down stabiliser
STEPA’s flap-down stabiliser is stronger and better protected due to its closed-body design. The ideal design of the flap reduces the pivot radius and provides a short support with a large reach.
Bronze bushings
Important bearing positions are executed with high-quality bronze bushings. Lubrication channels enable ideal distribution of grease. Long service life guaranteed!
